Intercall 700 system

The INTERCALL 700 is the latest innovation in the Intercall range of advanced call system. The system boasts all the features of the Intercall 600 system together with hands free two way speech facilities between all audio units. All room call points have an integral infra red receiver, which allows a call to be generated away from the call point without the need for trailing wires. Using the TIR4 Infra Red Trigger it is possible to identify the calling resident together with their location, which can be used to rout the call to specific members of staff. The system is fully addressable and only requires connection to a common 12v network cable. The system is configured using a PC compatible Computer or similar and may be programmed on or off site as required.

L752 AUDIO CALL POINT
An L752 Audio Call Point is required for every individual audio call location on the system. It features 7 levels of call, hands free two way intercom, integral infra red receiver, audio page facility, re-assurance LED & 'call waiting' sounder. The industry standard jack socket will accept a host of triggering devices. The unit may be flush or surface mounted using the Intercall BB1 Backbox.

L722 NON AUDIO CALL POINT
The L722 Non Audio Call Point contains identical features to the audio call point described above but without the intercom facility. Options which must be specified when ordering include: emergency call only & non-latching operation for telephone ring detectors etc.

L758 AUDIO DISPLAY UNIT
Audio display units are generally located throughout the establishment and provide a description of the call type, location and identity of caller together with sounding the integral alarm. It features 2 line back-lit display, multi function audible alarm, two way intercom facility and audio page facility to all other displays and to all members of staff present within a residents bedroom.

L762 CALL/DISPLAY UNIT
The L762 Call Display Unit combines the features of the speech call point with a built in display. When in staff present mode the unit will display all calls on the system in full alphanumeric text, enabling staff to speak to other callers elsewhere on the system without having to leave the room they are attending.

L722DK DOOR MONITORING POINT
The L722DK Door Monitoring Point can be used to protect fire doors, exit doors and other sensitive areas. The unit has an isolated key-switch in place of the jack socket, which can be used by authorized personnel to isolate the unit and prevent it from activating the alarm. The L722DK activates an "Emergency" call as standard and can be reset with a single press of the reset button.

L714 REMOTE SOUNDER WITH RELAY
Remote sounders are used in areas where an audible alarm is required to attract attention but no indication of call location is required. The sounder is similar in operation to a display unit with a multi level alarm, but has limited zoning facilities. Any assistance or emergency call on the system will over-ride the standard call tone. The unit is fitted with a relay that provides normally open and normally closed 'dry' contacts, which can be used to trigger auxiliary devices.

L746 OVERDOOR LIGHT
Overdoor lights are an optional item normally positioned above the door in a corridor to indicate the status of the call point(s) within the room. The L746 can also be used to monitor several call point addresses for end of corridor indication, or as a "follow me" light. Each unit is fitted with twin ultra-bright LED's which mimic the reassurance indicator on the call points. The L746S unit operates in the same way as the standard overdoor light but has the addition of an integral sounder.

L717 & L737 POWER SUPPLY
The L717 Power Supply provides the main power to the system. It requires a mains supply connection and it houses the backup battery, required to safeguard the system in the event of a mains failure. The power supply stores all the text programming information and can also be used to configure the system when a laptop is connected. The L737 Booster Power Supply unit is designed to increase the permitted number of units and quantity of cable allowed on any one system. It works by re-producing the signals made by the power supply, and several booster units may be connected as required.

PRINTERS AND ALPHANUMERIC PAGERS
Printers and alphanumeric pagers can be connected to the system with the L747 Universal Interface. The printer provides a permanent printed record of all system activity together with date and time. Pagers can be configured to display calls made on the system as they would appear on the display unit. This allows staff to carry on with their work without having to worry about missing calls. Pagers can also be specially configured to only receive certain calls, or calls at certain times of the day.

CMS LITE CALL MANAGEMENT SOFTWARE
The CMS Lite Call Management Software allows you to record and store all Intercall system activity on your personal computer. Giving you immediate access to information, it is easy to access the call history of a resident, keeping you in charge of your home. Staff pagers can also be controlled from your computer, allowing free text messages to be sent to individual pagers.