Special coiled elastic "bungees" can be ordered to protect the pagers from being dropped, and a silent vibrate motor is fitted as standard which is useful when used in noisy environments, where a beep alert may not be desired, or when used by the hearing impaired. The pager is also equipped with a clock.

TRANSMITTER UNIT

The transmitter unit can be set to operate in different modes i.e.

a) 4 different users can call one pager and be identified individually.
b) 1 user can call 4 different pagers.
or
c) 4 different users can call 2 pagers e.g. users 1 & 2 calls pager "X", 3 & 4 calls pager "Y".

The location of the transmitter and/or aerial will relate to the range that you can obtain from your system. The standard transmitter can quite easily provide ranges of a kilometer. Ranges can extend 1 to 4 miles when used with the correctly installed external aerials (subject to geographical conditions).

You may order additional pagers at anytime, provided that you have the serial and base numbers.

PAGER UNIT

OPERATING INSTRUCTIONS:

When a call is received the pager sounds an alert tone or vibrates silently and shows a numeric message on the display.

MEMORY CAPACITY:

The pager can hold up to 8 messages which are stored in a queue and numbered in the order of reception from 1 to 8, with number I being assigned to the latest message. V/hen a new message is received, each previously stored message moves up one place in the queue. If the pager holds 8 messages and a new message comes in, message number 8 is deleted automatically. The message number appears to the left of the numeric message every time a message is shown on the display.

FUNCTION BUTTON

The pager has one function button on the front used for power control, function setting, reset and scrolling.
BEEP TYPE INDICATOR. A, B. C. D

This may not be used in all applications, but the pager can have up to 4 beep types which can be attached to the messages received. When a call is received the beep type indicator A,B,C,D tells you which beep type was attached to the particular call. The page is also facilitated with two other types of beep alert. The second beep will provide a melody in place of the beep sound. A third option is also available, which is a double chirp followed by a short vibration. The fourth alert is purely a silent mode operation providing just a vibration from the pager.

MESSAGE DUPLICATION INDICATOR:

If your pager receives the same message more than once, only one message is stored and is given the most recent message number. The message call alert operates in the normal way, except that the repeat symbol appears below the message display.

TIME DISPLAY & SETTING:

The pager displays the time constantly when in standby mode is a 12 hour formal with am or pm indication. When you first use the pager the initial time setting is 12am.

MESSAGE TIME STAMP:

In accordance with the setting of the time indication, the pager records the time at which each message is received and stores it with the message. When you are reviewing stored messages, the pages displays the time stamp applicable to each message after the message is displayed.