SM10E X10 "Powerflash" Module
- Automatically turn
on lights, music, etc. when doors open
- Create your own security
system
- Add remote doorbell
chimes
- Turn off vacuum when
doorbell rings
- Signal you when the
garage door is open
This plug-in unit sends an X10 signal
to receiver devices when a contact closure is made or a low voltage
(6-18V AC, DC or Audio) is applied to its terminals. In mode 1 it
sends ALL LIGHTS ON to the same house code and a regular ON (to
operate appliances) to the same unit code that the interface is
set to. When contacts are opened it sends an OFF to the same unit
code but leaves the rest of the lights on. In mode 2 it sends a
flashing ALL LIGHTS ON/ALL OFF signal and leaves the lights ON after
the contacts are opened. In mode 3, which is the mode that will
be most used for non-security type applications, the interface sends
an ON only to the same house and unit code. When the contacts are
opened it sends an OFF to the same house and unit code.
- Triggered by Contact
Closure OR Low Voltage 6-18V (AC, DC or Audio)
- Mode 1: All Lights
On, 1 Appliance ON/OFF
- Mode 2: Flashing All
Lights On/Off
- Mode 3: On/Off For
One Unit Code Only
Can be used with Indoor or outdoor photo
electric beam detectors, Pressure sensitive mats, Hardwired PIRs,
or any closed contact device.
|
